2240 "BOSS" Valve & Variations
Seldom has so much been offered by so many for a series of airguns. Efforts of individuals, groups, shops, etc., on drawing tables, work benches, in back rooms and machine shops have brought 100s of accessories to the airgun market. Modifications and theory began filling 22XX commutations. Port, polish, cut, lengthen, slot, reduce, and enlarge are a few of the terms used.
Custom features for the 22XX series are as numerous as the number
of people willing to create his personal airgun. Grips, breeches, barrels,
adjustable sears, trigger over travel stops, sights, scopes, stocks, forearms,
bulk-fill caps, extension tubes, adjustable power screws, reinforcement valve
screws are some of the frequent modifications that are done or obtained by the
shooter.
Click on the pictures for a larger view!
BOSS Repeater breech on a 2250 with the BOSS, MaxFlow, Bulk-fill system.
BOSS Repeater breech, +/- 25 shot magazine, magazine support with bolt and
custom bolt handle. $85.00
BOSS Repeater breech on a 2240 with the BOSS 12 valve.
The BOSS Repeater Breech
The BOSS Repeater breech has an in-line tubular magazine that hold 25
Crosman round nose pellets. Other pellets and pellet lengths my be used. Each
hex. alum breech is dovetailed for a scope and is milled to allow use of the
standard Crosman rear sight. The BOSS repeater breech is available with the bolt
and magazine on the left side, LH model, or with the bolt and magazine on the
right side, RH model.
The BOSS Repeater breech consist of; breech, loading slide, magazine, magazine end plug, pellet stop, barrel/magazine support, and mounting screws.
Remove the magazine end plug, insert pellets, skirt first, in the magazine,
replace the plug.
Open the bolt, push the loading slide to the loading position. The barrel should
be tilted slightly up. The
pellet stop holds the second pellet in the magazine allowing the rear pellet to
drop into the loading slide.
return the slide to the firing position, close the bolt. Aim and fire.
The Boss valve offers reduced thread depth on the stem guide,
larger internal diameter, exhaust port angled.
Greater valve capacity.
Delivers air or gas faster to the projectile.
A standard valve below for comparison.
The Boss valve, modified stem guide & 12 gram CO2.
The valve stem and valve spring are unmodified originals.
$36.95
The Boss Max-Flow
The Max-Flow valve face seals the tube allowing Bulk-Filling.
The tapered passage directs the increased CO2 capacity directly to the Boss
valve.
A standard valve below for comparison.
$45.95
Economy
The Economy Bulk-Fill valve face pictured on a standard valve body can also
be used with the Boss valve
$28.95
Bulk-Fill
The complete Boss & Max-Flow Bulk-Fill system with Filling Head.
The valve stem and valve spring are unmodified originals.
$65.00
VALVES
top left: The Boss valve body and modified stem guide.
center left: The Max-Flow
Bulk-fill valve face.
lower left: The economy
Bulk-fill valve face.
upper right: A standard valve body and stem guide.
lower right: Bulk-Fill filling head with internal check valve & 1/8 NPT
female port.
BOSS AS
For the model AS 2250
$36.95
Crosman Tubes
The Boss 12 gram, Max-Flow and Economy systems can be used with either
Crosman tube 2240, 2250 or 2260.
Continuous Air
An early Crosman 150 frame supports the single ring paintball tank mount.
CO2 is transmitted directly from the tank to the Boss valve by pressure hose.
Custom bolt handle, blued steel, 6-32 thread $7.75
2240-50-60 extension tube blued steel 8 3/8 long $32.95
Low profile LPA adjustable open rear sight ( requires
dovetail groove ) $28.95
Trigger shoe, 22XX - 13XX and other models, alum, duel set screw mounting
$9.95
Home About Bryan & Assoc. Repair Services Parts Accessories Airguns
Lewis & Clark Rifle Ordering info Homemade Airguns