Home      About Bryan & Assoc      Repair Services      Parts      Airguns      Lewis & Clark Rifle      Airgun Shows        2240 "Boss" Valve
Ordering Info     Homemade Airguns

We offer complete reseal Kits for most Benjamin, Crosman, Daisy, Kessler, Rochester, Sheridan and other Vintage models. Each kit contains all required parts, with drawing & oil sampler to restore seal and power to your airgun. [email protected] To request a reseal kit, state the manufacturer and model followed by the word KIT.

American made. We are proud that all items and accessories made by or for Bryan & Associates are,
Made in the USA.

     FEB. 1 2008 UPS GROUND Shipping is $20.00 per single rifle, add $7.00 for each additional.
A single pistol is $15.00, add $7.00 for each additional.

Min. United States mail Parcel Post is $6.00 in the 48 States.
International shipping is limited to previously established clients.

Before requesting an item, see the warranty and return policies posted at
the bottom of this page.

Accessories
Click the thumbs for a bigger picture

  BOSS Repeater breech on a 2250 with the BOSS, MaxFlow, Bulk-fill system.  

  BOSS Repeater breech, +/- 25 shot magazine, magazine support with bolt and custom bolt handle.  $85.00 

BOSS Repeater breech on a 2240 with the BOSS 12 valve.

                                                            The BOSS Repeater Breech

                     The BOSS Repeater breech has an in-line tubular magazine that hold 25 Crosman round nose pellets. Other pellets and pellet lengths my be used. Each hex. alum breech is dovetailed for a scope and is milled to allow use of the standard Crosman rear sight. The BOSS repeater breech is available with the bolt
and magazine on the left side, LH model, or with the bolt and magazine on the right side, RH model.

The BOSS Repeater breech consist of; breech, loading slide, magazine, magazine end plug, pellet stop, barrel/magazine support, and mounting screws.

                     Remove the magazine end plug, insert pellets, skirt first, in the magazine, replace the plug.
Open the bolt, push the loading slide to the loading position. The barrel should be tilted slightly up. The
pellet stop holds the second pellet in the magazine allowing the rear pellet to drop into the loading slide.
return the slide to the firing position, close the bolt. Aim and fire.                      
 

The "BOSS" VALVE

                        The "BOSS" valve with modified stem guide complete
                                  and 12 gram CO2.                                              $36.95

                        The "BOSS" valve & Max-flow head complete. $45.95

                                                                        
                        The complete Boss & Max-Flow Bulk-Fill system with
                                     Filling Head.                                                   $65.00

                                                                        

                                                                             BOSS AS
                                                                             For the model AS 2250. $36.95

Custom bolt handle, blued steel, 6-32 thread    $6.75

2240-50-60 extension tube blued steel 8 3/8 long    $32.50

Low profile LPA adjustable open rear sight ( requires dovetail groove )  $28.95

Trigger shoe, 22XX - 13XX and other models, alum, duel set screw mounting  $9.95

BARRELS
Anschutz   21 3/8" long  .177 cal  .615 dia.       BLUED    NEW       $65.00

Luther-Walther  19 3/4" long .177 cal  .630 dia                  NEW        $45.00
                                                      .20 cal                                     NEW       $45.00
                                                      .22 cal                                     NEW           N/A

Bolt Handle  designed for the 22XX and 1377 also fits other models
                            1 1/2" overall , .430 dia. knob, 6-32 thread, BLUE STEEL   $7.75

BENJAMIN   Valve Tool  Most early models require this tool.    $12.95

BENJAMIN  Rear Sights    Bar-0 Rear Peep Sight             $16.75
                                                 Bar-V Rear Sight                        $17.25
                                    No. 273 Detachable Rear Peep Sight      $35.00
BENJAMIN Pistol Trigger  A Blue Steel Trigger for most models     $17.00

   Crosman

Crosman 400 magazine  40.00

MK-l      and     ll     Bulk-fill    1/8 national pipe female fitting

                                                    
MK-l     and      ll     Paintball        Attaches paintball tank to MK-l or ll    $32.95

160 type           Bulk-fill           fits models 150/7, 160/7, 166, 180/7,
                                                   262/3, 400, 600, 677, and 1100

                                                          $32.95 

2240-50-60    Bulk-fill    Economy    Two piece adapter                $32.95    
                                                                                       

QB                  Bulk-fill adapter for models 77- 78 & 79rifles.         $32.95

S&W
78g & 79g       Bulk-fill                                                                      $32.95
78g & 79g       Paintball                                                                    $32.95

160 type Extension tube     N/A 
        Note: We now offer a connecter that attaches the 22XX extension
                    and filling head to the early external CO2 tubes.  160/22XX    $12.95                

 2240-50-60       Extension Tube Use with B-F adapter, The 8 3/8 inch tube increases
 CO2 capacity.          $32.50


Dummy CO2      replaces 12 gram CO2 allowing the attachment of a paintball tank,           
                                                        or hose     Light weight anodized Alum.      $18.95    

20 LB Adapter      Both 1/8 pipe male &  paintball female threads. Plus double 1/8 female.

  20 LB Adapter   A

BC D  E F
a. Attach to any paintball tank with shut off, to fill 10 oz. tanks.
b. Attach to any paintball tank with shut off, to fill air guns with 1/8 fitting.
c. Attach to any paintball tank, connect a hose (not included)  to airgun for continuous shooting.
d. Attach a paintball tank to an airgun with 1/8 fitting.
                 Can be used with pin valve tank also.
e. Use with the Dummy CO2, to Bulk-Fill & add extra CO2 to many 12 gram airguns.
                 Can be used with pin valve tank also.
f.  Used to fill 10 oz. tanks from paintball supply tank.
                    $24.95
                                                    20 LB adapter above plus fitting to fill the
                                                           Crosman CG tanks.    $28.95

                             Paintball to Paintball
  Allows filling of a paintball tank from a paintball or commercial tank.                                 N/A
Filling tank should have an OFF/ON valve.
 

                        A                                                   B                     Air Source Refill adapter 
A. "new A" is a two piece brass unit capable of filling paintball tanks
        from other paintball tanks or paintball type fittings as well as
        filling 88 gram Air Source tanks with adapter B.                                                         $17.95                        
B. Blued steel adapter with check valve allows refilling of an empty 88 gram
        Air Source bottle. The AS bottle can be attached or removed as often
        as desired. The CHECK VALVE seals the AS bottle.                                                  $18.95
C. Adapters A & B unit.                                                                                                               $34.95
The blued B can be filled from paintball tanks with either OFF/ON or pin valves
    by the MULTI TIP adapter with 88 gram female tip below.

  The blued steel unit B above attached to an 88 gram CO2 fits and hides
     completely under the fore stock of the Hammerli 850 rifle  
                                                              

Paintball to 88 gram Air Source                                                                                                     $25.95
Attach any paintball tank even the pin valve tank  to the Air Source male thread.
The internal floating pin depresses and opens the pin valve as the
     paintball tank is fully installed to Crosman carbines and rifles.

Hammerli 850 / RWS 850  9 oz. paintball adapter                                                                      $26.00
Attach a 9 oz. paintball tank with pin valve to your 850
The internal floating pin depresses and opens the pin valve as the
     paintball tank is fully installed in the 850 rifle.

     Paintball to 1/8 NPT "OFF/ON"           N/A
Attach any paintball tank even the pin valve tank  to the 1/8 NPT male thread.
   The knob will open the PIN Valve. A tank with Off/On valve can also be used. 

     
Multiple tip adapter OFF/ON fill paintball
tanks from other paint ball fitting even the pin valve tanks.
The knob will open the PIN Valve. Tanks with Off/On valve can also be used. 
The paintball to paintball OFF/ON unit with one tip (your choice)  is                             $35.95

Tips are a 1/8 NPT male                                                                                                                $9.00
                    AS 88 gram male                                                                                                        $9.00
                    AS 88 gram female                                                                                                     $9.00
                    Paintball male                                                                                                              $9.00                                                   

Dust cover      Brass cap 1/8 pipe thread to maintain inlet clear.

Thread Saver    Brass male and female thread protects for 10 oz. tank  and airgun threads.
Dust covers and Thread savers are,   $2.00 each.

CROSMAN       models 100 - 101 & some CG rear sights.
                            

Early Crosman 101 Hexagon peep sight with retaining screw       $8.25

Early Crosman 101 rear sight and bridge                                           $18.95

Late Crosman 101 heavy rear sight bridge                                        $12.95

Late Crosman 101 rear two piece knurled peep sight                       $8.75

Late Crosman 101 rear sight and bridge                                             $17.95

 
102 & 104   
                            Open "V" notch sight, as shown.                 $12.75
                             Peep sight                                                             N/A

M-1 Magazine     No BB cavity (made in the Philippines)           $18.00

Boxes & Manuals
Crosman, Daisy and other manufacturers.; Original boxes and owners manuals. Plus,  
Please state manufacturer, model and cal. style of box and/or manual required.
Price and availability on request.

CO2 Tanks
Crosman 10 oz.   $35.00
New 4 oz. paintball tanks   N/A
                  plus $10.00 shipping.

To Shoot or not to Shoot


Crosman offered this training system to law enforcement, clubs, etc.
in the late 1960's. The moving picture projects a villain or a good guy
in random order. Firing a CO2 powered airgun, with or with out pellets,
stops the picture. A touch on the reset button continues the action.
1 Projector
1 Control unit
4 different  film cassettes
Complete instructions             N/A


TOOL   Benjamin / Sheridan valve tool. Removes and installs the
                retaining nut and valve seat/guide.       $12.95

TOOL Benjamin No. 3 Extractor Pliers                     N/A

TOOL Benjamin No. 4 Brass Tapered Cylindrical Tool
               Installs "O" rings on several models                      $6.00


TOOL  Crosman valve tool, T-1.                                  
Removes valve retaining nut from models 100 thru 120.   NO Longer Available see Combo tool below.
   
TOOL Crosman Pump Adjusting tool, T-2  $4.00


  Crosman valve tool, T- 5.
Removes & installs exhaust valve body, models 105-120.  see combo tool below  N/A

TOOL Combination, T-1/T-5 For use with all models 100 through 120   T-1/T-5 Combo    $18.95

TOOL Crosman Handle for ALL (Crosman) Tools, T-7.  $2.00

TOOL Crosman valve body disassembly tool, T-9
Removes & installs exhaust valve body, models 160-166-167-
                               180-187-400-600-677-700-707                               $18.95

TOOL Crosman  T- 38-11 Valve Stem Nut Tool
Removes & installs valve stem nut on 38-60 valve body             $9.00

TOOL Crosman  T-38-58 Retaining Screw Tool
Removes & installs 38 an other powerlet (nut) screw assembly
                           and 10-4 barrel nut on models MK-l & ll                  $9.00

TOOL Crosman  45T-1 End Seal Retainer Tool
Assemble retainer ring 45-51 on models SA 6- 36- 44- 45             $6.00

TOOL Crosman 99-92 Pell Extractor Rod
Remove 1 or 2 pellets from .22 cal. barrels, 20 inches long         $8.00 

TOOL Crosman 451-BL
Barrel Locater Gauge                                                                             $5.00

TOOL Crosman MT- 1- 18 Stud Tool
Help assemble tube plug 350-35 on models M-1 - V350 & 3500  $6.00

Tool Crosman Factory Jig for holding while you work
models 166 * SA-6 - 36 - 44 - 45 * 338 * 766 - 2100 - 2200 *             $5.00 each

TOOL   Sheridan / Benjamin valve tool. Removes and installs the retaining nut and valve seat/guide.       $12.95

Schematic (parts drawings) are $3.00 per model mailed in the 48 states.

Shop  Manuals, The manufactures step by step, trouble shooting and repair manuals, not all models were offered by manufacture. $6.00 per model mailed in the 48 states.  Benjamin or Sheridan, did offer a true shop manual.                              

Misc. 
Caps, pellet tins, BB containers, CO2 packs, patches, knives, buckles and other memorabilia are often on hand. Please, make your particular request.

**Complete your boxed set with an Owner Manual, Tin of Pellets and/or Pack of CO2s. **

Urethane Grips            Crosman    Gray -  677  
                                          only remaining model                                          
                                                                        $18.50 pr.
        
 

Books, Magazines, Etc.

Factory Service Manuals    ** Service manuals were not offered for all models. Benjamin or Sheridan did NOT offer a true service manual.**
               Trouble shooting, Disassemble and assemble details.      $6.00

Schematic   Parts drawings
              Part names, numbers and locations.                                        $3.00

                                                           
Air Guns by Wolff                      Air Pistols by Hiller                  $25.00 Shipped LeDoux    
       $25.00                                        $35.00                                          

            $20.00   Chapman            N/A         Robert Beeman

The Construction and Operation of the Air Gun

Vol. 1 The Austrian Army Repeating Air Rifle   $45. 00

Vol. 2 The Walking Stick Air Gun   $50.00   

Air Guns  A Guide to Air Pistols & Air rifles   N/A

Gas, Spring and Air Guns of the world  by W. H. B. Smith 1st edition    N/A

 
All Books, magazines and catalogs are priced as marked and mailed in the 48 states.

Back Issues of domestic airgun magazines.

Airgun News & Report  Vol. 1 no. 2 * no. 4

American Airgunner       Vol. 3 no. 2 * no. 3 * no. 4
                                             Vol. 4 no. 1 * no. 3 * no. 4
                                             Vol. 5 no. 1
                                             Vol. 6 no. 1* no. 2 * no. 3 * no. 4
                                             Vol. 7 no. 1 * no. 2
U.S. Airgun Magazine    October, November, December 1993
                                             April, May, June 1994
                                             Vol. ll  no. 
                                             Vol. lll no. 4
                                             Vol. lV no. 1 * no. 2 * no. 4 * no. 5 * no. 6
                                             Vol. V  no. 1 * no. 2 * no. 3 * no. 4 * no. 5 * no. 6
                                             Vol. Vl no. 1 * no. 2 * no. 3 * no. 4 * no. 5
                                             Vol. Vll  no. 2 * no. 3
                                             Vol. Vlll no. 2 * no. 4
                                             Vol. lX   no. 1 * no. 2

RF& Airgun                       Vol. l no. 1 * no. 2 * no. 3

Airgun Hobby          PREMIER  Vol. 1 No. 1   Oct., Nov., Dec. 04       $7.00 + postage
                                All following Volumes are $7.00 each + postage
                                Publish quarterly delivered to your US address $26.00 annually
                                                                            Canada or Mexico $30.00      "
                                                       all other International addresses $60.00      "
                                For a complete directory of topics issue by issue check
                                  mailto:www.airgunartisans.com/AAAirgunhobby.htm
                                                
                             

    American made. We are proud that all items and accessories made for Bryan & Associates are,
Made in the USA.

WARRANTY:
As of Nov. 15, 2004 Bryan & Associates offers NO warranty, repair or
replacement program for airguns.
The manufacture's warranty accompanies each NEW airgun.
LN, Like New, or LNIB, Like New in Box, do not indicate NEW.
 NO WARRANTY is OFFERED or IMPLIED in any way for used airguns.
All airguns are tested on arrival and at the time of packing.
* ALL AIRGUNS ARE- SHOOTING (unless otherwise stated)* 
** ALL used AIRGUNS are "Offered - AS-IS" **   

Return Policy:
As of Nov. 15, 2004 A. The return must be authorized by Bryan & Associates by
phone or e-mail within three days of delivery. B. The item must be returned as
promptly as originally shipped. C. The original B & A invoice must accompany
the item at the time of delivery. D. The purchaser is responsible for ALL shipping
cost. E. A restocking fee of 15% applies to all airguns and 25% to all parts, and
accessories. Books, magazines, manuals, and all paper goods are not refundable.
F. Each item and part there-of must arrive in the unused or original condition
as shipped.


BRYAN & ASSOCIATES
P O Box 5772
Anderson SC 29623
  864 - 261 - 6810

Home      About Bryan & Assoc      Repair Services      Parts            Airguns      Lewis & Clark Rifle     
Airgun Shows      Ordering Info     Homemade Airguns     2240 "Boss" Valve